Description
Fonolab Remton Audio LCR MC Tube Phono Stage with separate Balanced MC Step-Up Transformer
As it is well known, phono cartridges are all balanced. This is because a phono cartridge is a coil of wire with two endsnaturally balanced audio comes out.
Unfortunately, its almost always connected as if it was a single ended device.
By using the custom Fonolab balanced SVPER QVATTVOR Step-Up transformer, you still retain the original balanced signal.
In collaboration with Remton Audio, our long-time analogue audio partner, we offer a combination of an LCR tube phono stage and an external balanced MC step-up transformer.
With our participation, Remton Audio has created a series of tube phono stages based on the famous Remton Audio LCR model with the ability to expand the system to a fully balanced one.
Improvements have been made to shielding and vibration suppression, as well as a redesigned appearance to match the design of our step-up transformers and our other products.
The result is a fully balanced phono stage with all the advantages of such solution, namely common-mode rejection, where noise signals are squashed, lower noise and distortion.
A balanced cartridge, a balanced transformer combined with a balanced phono stage, so we’ve taken the magic of analogue signaling one step further.
An ideal solution for the progressive construction of a true desert island super high-quality audio system.
Our Statement : Until you have experienced the game-changing musical impact of the Fonolab Remton Audio LCR MC Tube Balanced Phono Stage, you have never truly heard what your vinyl collection is capapable of………..
Features
- Fully balanced Passive LCR RIAA equalization
- Zero negative feedback
- Soft-start DC high voltage supply
- New damped steel case
- Silver-plated Neutrik XLR sockets for balanced source
- Gold-plated RCA phono sockets with Teflon insulation for two inputs and two outputs
- Designed and manufactured in Czechia
Specifications:
- Step-Up transformer section
- Input impedance: 0-5 / 40 Ohms
- Output impedance: 4k Ohms
- Frequency response: 10Hz to 120kHz (+0.5dB1.0dB)
- Channel balance: within 0.5 dB
- Ratio: 1:33 / 1:10
- Phase characteristics: Within 10° (20Hz50kHz)
Tube Phono Stage section
- Frequency response RIAA: 20 Hz to 20 kHz ±0.3 dB
- Input impedance: from 36 Ohm to 100 kOhm
- Input capacitance: 0, 47 pF, 100 pF, 147 pF, 220 pF, 267 pF, 367 pF
- MC Input impedance: 0-5 / 40 Ohms (Ratio: 1:33 / 1:10)
- Output impedance: 200 Ohms
- Gain: 48dB
- Dimensions: 386 x 295 x 85 mm
- Weight: 12 kg
Reviews
There are no reviews yet.